How to Activate the RDS CAL License on Windows Server 2022 and Allow More Than 2 Simultaneous Users

If you have purchased an RDS CAL (Client Access License) for your Windows VPS, but the server keeps blocking connections from the 2nd or 3rd simultaneous access via Remote Desktop (RDP), this guide is for you.

In this tutorial from HostMF, we show the complete process — from activating the license server and installing the CALs to configuring the RD Session Host role and final validation. When you finish, your Windows Server 2022 will be ready to support multiple simultaneous users without the two-connection limit.

Quick summary: installing the CALs is not enough to allow more connections. You must enable the Remote Desktop Session Host (RD Session Host) role and configure the licensing mode. Without this step, Windows remains in administrative mode, limited to 2 connections.


Why does Windows Server limit access to 2 users?

By default, every Windows Server comes with the "Remote Desktop for Administration" mode, which allows a maximum of 2 simultaneous sessions — intended only for administrative tasks.

When you attempt a third connection, the following message appears:

"Select a user to disconnect so that you can log on. Too many users are connected."

This limit is not removed simply by purchasing and installing the CALs. The licenses remain "idle", not being consumed, because the function that actually manages sessions is missing: the RD Session Host. It is this role that lifts the 2-connection ceiling and starts consuming the licenses you purchased.


Prerequisites

Before you begin, confirm that you have:

  • An active Windows Server 2022 VPS at HostMF.
  • The RDS CAL license already purchased (e.g., a pack of 50 CALs).
  • Administrator access to the server via RDP.
  • Availability for one server restart (installing the RD Session Host requires a reboot).

Step 1 — Install the Licensing role and activate the license server

This is the initial step, usually performed by the technical team when the license is delivered.

  1. Open Server Manager → Manage → Add Roles and Features.
  2. Choose Role-based or feature-based installation and select the local server.
  3. Under Server Roles, expand Remote Desktop Services and check Remote Desktop Licensing.
  4. Complete the wizard and install.

Next, activate the license server and install the CALs:

  1. Open Tools → Remote Desktop Services → Remote Desktop Licensing Manager.
  2. Right-click the server → Activate Server and follow the wizard.
  3. Once activated, right-click again → Install Licenses.
  4. Select the correct licensing program, enter the details, and install the package (e.g., 50 Per User CALs – Windows Server 2022).

At the end, the wizard will display the confirmation:

"The requested licenses were installed successfully."

✅ At this point, the 50 CALs are installed on the license server — but the 2-connection limit has not yet been removed. Continue to the next step.


Step 2 — Install the RD Session Host role

This is the role that actually enables simultaneous connections.

Open PowerShell as Administrator and run:

Install-WindowsFeature -Name RDS-RD-Server -IncludeManagementTools -Restart

⚠️ The -Restart parameter automatically restarts the server when the installation completes. Make sure no one is in a critical operation before running it.

After the reboot, confirm that both roles are installed:

Get-WindowsFeature RDS-RD-Server, RDS-Licensing

The expected result is Installed on both lines:

Display Name                                          Name             Install State
------------                                          ----             -------------
[X] Remote Desktop Session Host                       RDS-RD-Server    Installed
[X] Remote Desktop Licensing                          RDS-Licensing    Installed

Step 3 — Set the licensing mode and license server

Now you must tell the RD Session Host which license server to use and in which mode (Per User or Per Device). Since the CALs purchased are Per User, configure this mode.

Option A — Via Group Policy (recommended)

  1. Run gpedit.msc.
  2. Navigate to: Computer Configuration → Administrative Templates → Windows Components → Remote Desktop Services → Remote Desktop Session Host → Licensing.
  3. Configure:
    • Use the specified Remote Desktop license servers → Enabled → enter localhost.
    • Set the Remote Desktop licensing mode → Enabled → Per User.
  4. Apply the policy:
gpupdate /force

Option B — Via PowerShell (WMI)

$ts = Get-WmiObject -Namespace "root\cimv2\terminalservices" -Class Win32_TerminalServiceSetting
$ts.ChangeMode(4)                              # 4 = Per User | 2 = Per Device
$ts.SetSpecifiedLicenseServerList("localhost")
$ts.GetSpecifiedLicenseServerList()            # confirms the write

???? Important note: if the server already has these settings applied (via GPO or the system image), the ChangeMode and SetSpecifiedLicenseServerList commands may return "Invalid operation". This is harmless — it simply means there was nothing to change. What matters is the result shown by the Diagnoser in the next step.


Step 4 — Validate the configuration in the Licensing Diagnoser

The Remote Desktop Licensing Diagnoser is the source of truth for confirming that everything is correct.

  1. Open Tools → Remote Desktop Services → Remote Desktop Licensing Diagnoser.
  2. Check the Session Host Server Configuration Details.

The ideal result is:

Item Expected value
Status message No problems/warnings
Number of available licenses 50 (or your package)
Session Host server version Windows Server 2022
Licensing mode Per User
License server (localhost) Credentials and Connectivity: Available

If the diagnosis displays "no problems to report" and 0 warnings, the configuration is successfully complete.


Step 5 — Test simultaneous access

Do a practical test: open a third simultaneous RDP session on the server.

  • ✅ If you connect normally, without the "Select a user to disconnect" screen, the problem is resolved.
  • ❌ If it still blocks, review steps 2 and 3 (RD Session Host installed and Per User mode applied) and restart the server once more.

Frequently Asked Questions (FAQ)

I installed the CALs and the server still limits me to 2 users. Why?

Because installing the CALs on the license server does not remove the default administrative limit. You must install and configure the RD Session Host role (Step 2). Without it, the licenses are not consumed.

What is the difference between "Per User" and "Per Device" CALs?

  • Per User: the license is tied to the user's account, which can access from any device.
  • Per Device: the license is tied to the equipment that connects. Configure the same mode as the CALs you purchased to avoid conflicts.

My VPS is not on a domain (workgroup). Do Per User CALs work?

Yes. In workgroup environments (without Active Directory), the Diagnoser may display a warning that Per User CALs are not tracked. This is expected and does not prevent connections — access continues to work normally.

I got an "Invalid operation" error when running ChangeMode in PowerShell. Is it a problem?

No, as long as the Diagnoser shows the correct mode and zero problems. The error usually occurs when the configuration is already applied (including via GPO, which WMI does not overwrite).

I see event ID 36 (TerminalServices-ServerUSBDevices / PnPDevices). Should I be concerned?

No. These are benign warnings about USB/RemoteFX redirection and are unrelated to licensing or the session limit. They can be ignored.

Do I need to restart the server?

Yes, once, right after installing the RD Session Host role (Step 2). The other steps do not require a reboot.


Conclusion

To allow more than 2 simultaneous users on your Windows Server 2022 VPS, remember the correct sequence:

  1. Install Licensing and install the CALs.
  2. Install the RD Session Host role (with reboot).
  3. Set the Per User mode and point to the license server.
  4. Validate in the Diagnoser.
  5. Test simultaneous access.

The CALs alone do not remove the limit — the RD Session Host is the key component.


Need help with your Windows VPS? The HostMF support team is available to activate and configure the RDS licensing on your server. Open a ticket at hostmf.com.br and talk to our team.

Was this answer helpful? 101 Users Found This Useful (389 Votes)